The Cannondale Trail 2 is a mountain bike, built on a aluminium frame, listed at $1,099. An off-road bike for trails, with grippy tyres and trail-ready geometry.
aluminiumdisc brakehardtailtrail
SizingWhat size Trail 2 do I need?
cm
Enter your height to see the size we would start with.
General guide: mountain bikes
Size
Rider height
In feet
XS
142 to 155 cm
4 ft 8 in to 5 ft 1 in
S
152 to 165 cm
5 ft 0 in to 5 ft 5 in
M
165 to 177 cm
5 ft 5 in to 5 ft 10 in
L
177 to 188 cm
5 ft 10 in to 6 ft 2 in
XL
188 to 198 cm
6 ft 2 in to 6 ft 6 in
Height is a starting point: arm and leg length, flexibility and riding style all matter, so a test ride beats any chart. How bike sizing works.
SpecificationsWhat we know
Brand
Cannondale
Category
Mountain
Frame
Aluminium
Brakes
Disc
Price
$1,099, RRP AUD (Ivanhoe Cycles)
Specs and pricing are listed in AUD and sourced from Australian retail listings. Confirm the current details and availability with the seller before purchase.
GeometrySize M
Cannondale Trail 2, size M. Published geometry, drawn to scale (BB drop or fork offset not published, typical value used).
Stack
623 mm
Reach
425 mm
Stack/reach
1.47
Head angle
68 deg
Seat angle
73.5 deg
Wheelbase
1140 mm
Chainstay
445 mm
BB drop
65 mm
GearingRatios
0.65lowest (climbing)
2.73highest (speed)
Very low climbing gear
Ratios are derived from the chainrings and cassette. They describe the gearing, not any rider's ability.
Drivetrain & buildFull specification
Groupset
Shimano CUES
Drive
1x
Speeds
9
Crank
ProWheel Charm, 30T
Chainrings
30
Cassette
Shimano CUES, 9-speed
Rear derailleur
Shimano CUES U4000
Brakes
Tektro M275 hydraulic disc
Rotors
160/160
Wheelset
WTB SX19, 32h
Stock tyre
29x2.25
Fork material
SR Suntour XCM Boost
BB standard
BSA 73mm threaded
Thru-axle
12x142mm rear, 15x100mm front
Seatpost
Cannondale 4 alloy, 31.6mm
Cockpit
Cannondale Riser bar 720mm, Cannondale 4 stem
Saddle
Cannondale Trail
UDH
Yes
SuspensionMTB detail
Front travel
100 mm
Fork
SR Suntour XCM Boost
Wheel config
29
Dropper
No, rigid seatpost
Discipline
Trail
Suspension
hardtail
Bike DNAWhat the numbers say
Steering
A 68 deg head angle points to balanced trail handling.
Climbing
Lowest ratio 0.65 is a very low climbing gear for steep or loaded climbs.
Derived from the published geometry and gearing above. It describes the numbers, not a ride test.
BikeFinder Data Profile: geometry and specification researched from published sources (Cannondale official page; geometry image-only, omitted + backfill 2026-09-27: bikeinsights.com, cannondale.com), verified 2026-09-04. This is a specification analysis, not a physical ride review.